Formation and tribological properties of two‐component ultrathin ionic liquid films on Si

Several single‐component and two‐component imidazolium ionic liquids (ILs) ultrathin films were formed on Si substrates by a dip‐coating and heat treatment process. The formation and surface properties of the films were analyzed by means of ellipsometric thickness measurement, X‐ray photoelectron spectra and atomic force microscope. The adhesive and nanotribological behaviors of the films were evaluated by a homemade colloidal probe. A ball‐on‐plate tribometer was used to test the microtribological performances of these films. As a result, the two‐component ILs ultrathin film containing 80% solid‐like ILs phase shows more homogenous surface morphologies and optimal micro/nano‐tribological properties as compared to single‐component ILs films, which is ascribed to a synergic effect between the steady solid‐like ILs phase as the backbone and the proper amount of flowable liquid‐like ILs phase. By studying the influence of various solid/liquid ILs ratios on tribological properties of the two‐component ILs films, we might find the way to design ILs films with excellent comprehensive tribological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Catalytic activity of chiral chelating N-heterocyclic carbene palladium complexes towards asymmetric allylic alkylation

Abstract

The catalytic activity of a series of chiral heteroaryl coordinated chelating N-heterocyclic carbene (NHC) palladium complexes towards asymmetric allylic alkylation (AAA) were presented here. The effects of different N-substituents, NHC backbones and chelate rings on the catalytic activity and the enantioselectivity of the alkylation of (E)-1,3-diarylallyl acetates with dialkyl malonate were investigated. The results showed that, under the optimized conditions, complexes 3a, 3b, and 3i carrying the pyridinyl-coordinated five-membered chelate ring showed high catalytic activity and chiral induction efficiency. The corresponding alkylated products were obtained in high yields with moderate ee. Furthermore, it was found that the substituents of (E)-1,3-diarylallyl acetates and the type of the nucleophile affect the results as well.     

Metal-free synthesis of (E)-vinyl sulfones via denitrative coupling reactions of β-nitrostyrenes with sodium sulfinates

Abstract

A practical metal-free procedure for the synthesis of (E)-vinyl sulfones has been developed through the coupling of β-nitrostyrenes with sodium sulfinates under microwave irradiation. This methodology provides a convenient and efficient approach to various (E)-vinyl sulfones from readily available starting materials with excellent regioselectivity. The present oxidative reaction involves an efficient denitrative radical cross-coupling of β-nitrostyrenes with sodium sulfinates via using AcOH as an additive.     

Catalytic effect analysis of metallic additives on light crude oil by TG and DSC tests

This research aimed at the investigation of the effect of different metallic additive on the combustion and kinetic behavior of crude oil. For this purpose, the thermal behavior of the oil-only and oil–metallic salts mixtures were studies by the thermogravimetry (TG)/derivative thermogravimetry and differential scanning calorimetry (DSC) on heating rate at 10 °C min^?1. The result shows that Dagang crude oil exhibited apparent low temperature oxidation (LTO), fuel deposition, and high temperature oxidation processes. With the addition of metallic salts, the LTO process has been shortened and samples added CuSO₄, CrCl₃·6H₂O, and AlCl₃·6H₂O achieved a much lower peak temperature than that of oil. Based on the Arrhenius model, metallic additives were proven to have obvious influence on the combustion activation energy. And, by comprehensive analysis of TG/DSC profile and activation energy, ZnSO₄ exhibited a positive influence on light crude oil combustion during the high pressure air injection process.     

Direct electrochemistry of hemoglobin on graphene/Fe3O4 nanocomposite-modified glass carbon electrode and its sensitive detection for hydrogen peroxide

Graphene/Fe₃O₄ nanocomposite was prepared for the immobilization of hemoglobin (Hb) to improve the electron transfer between Hb and glass carbon electrode (GCE). The characterization of nanocomposites was described by transmission electron microscopy, Fourier transform infrared, Raman spectroscopy, and X-ray photoelectron spectroscopy, respectively. The electrochemistry of Hb on the graphene/Fe₃O₄-based GCE was investigated by cyclic voltammetry and amperometric measurement. The modified electrode showed a wide linear range from 0.25 μmol/L to 1.7 mmol/L with a correlation coefficient of 0.9967. The detection limit of the H₂O₂ biosensor was estimated at 6.0?×?10^?6?mol/L at a signal-to-noise ratio of 3.     

Relation between morphology and conductivity in TiO2 nanotube arrays: an electrochemical impedance spectrometric investigation

Two types of TiO₂ nanotubular arrays were obtained by anodisation of a titanium foil, in two different solutions containing fluoride ions. For the first type which has rough tube walls, impedance measurements in the dark showed the presence of a localised surface state which was related to adsorbed molecular water. Under UV illumination, this adsorbed molecular water was photo-dissociated. Moreover, an increase of 2 orders of magnitude for the limiting capacitance of the space charge layer was observed, simultaneously with the disappearance of the localised state and with a 100-time increase of the carrier density associated with hydrogen insertion. The second type of layer was characterised by smoother tube walls, a high doping level (10²⁰?cm^?3) in the dark, a lack of localised states and no long-lasting photo-induced effect. In this case, the width of the space charge layer became rapidly higher than the half-thickness of the tube walls, when the applied potential increased. Therefore, the walls were progressively depleted under anodic polarisation, passing from a situation where the tubes were totally active in the cathodic range towards a situation where the contribution of the tube walls could be neglected.     

Reversal of elution order of N‐(2,4‐dinitrophenyl)‐proline and N‐(2,4‐dinitrophenyl)‐serine in HPLC by BSA chiral stationary phase

N‐(2,4‐dinitrophenyl)‐proline and N‐(2,4‐dinitrophenyl)‐serine were enantiomerically resolved on the BSA chiral stationary phase by HPLC in reversed‐phase mode. Effects of chromatographic conditions on enantioseparation and elution order have been investigated in detail. For these two samples, reversal of enantiomer elution order was observed by changing buffer pH, the content of acetonitrile, or alcohol modifiers in mobile phase, which is firstly reported in the BSA chiral stationary phase studies. More interestingly, combined effect between buffer pH and the content of acetonitrile was also observed. In addition, coelution range of enantiomers varied along with the content of acetonitrile in mobile phase.     

A silver(I)–rhodium(I) cooperative catalysis in the reaction of N′-(2-alkynylbenzylidene)hydrazide with 2-vinyloxirane

A novel and efficient route to H-pyrazolo[5,1-a]isoquinoline-1-carbaldehydes via a tandem reaction of N′-(2-alkynylbenzylidene)hydrazide with 2-vinyloxirane is described. The reaction proceeds through a silver(I)–rhodium(I) cooperative catalysis.     

Near‐Infrared‐Controlled,Targeted Hydrophobic Drug‐Delivery System for Synergistic Cancer Therapy

Hydrophobicity has been an obstacle that hinders the use of many anticancer drugs. A critical challenge for cancer therapy concerns the limited availability of effective biocompatible delivery systems for most hydrophobic therapeutic anticancer drugs. In this study, we have developed a targeted near‐infrared (NIR)‐regulated hydrophobic drug‐delivery platform based on gold nanorods incorporated within a mesoporous silica framework (AuMPs). Upon application of NIR light, the photothermal effect of the gold nanorods leads to a rapid rise in the local temperature, thus resulting in the release of the entrapped drug molecules. By integrating chemotherapy and photothermotherapy into one system, we have studied the therapeutic effects of camptothecin‐loaded AuMP‐polyethylene glycol‐folic acid nanocarrier. Results revealed a synergistic effect in vitro and in vivo, which would make it possible to enhance the therapeutic effect of hydrophobic drugs and decrease drug side effects. Studies have shown the feasibility of using this nanocarrier as a targeted and noninvasive remote‐controlled hydrophobic drug‐delivery system with high spatial/temperal resolution. Owing to these advantages, we envision that this NIR‐controlled, targeted drug‐delivery method would promote the development of high‐performance hydrophobic anticancer drug‐delivery system in future clinical applications.     

高耐热PLLA/PDLA共混物的热性能和结晶结构研究

通过熔融共混法制备了一系列等比例聚左旋乳酸(PLLA)/聚右旋乳酸(PDLA)共混试样,采用差示扫描量热法(DSC)、核磁共振(13C-NMR)及广角X射线衍射(WAXD)等方法对共混产物进行了表征和研究分析.结果表明,等比例PLLA和PDLA熔融共混生成了立构复合物(stereocomplex,sc),同时部分均聚物发生酯交换反应,生成了立体嵌段物(stereoblock,sb),从而在DSC升温曲线上sc晶体处出现特殊的熔融双峰现象;随着熔融共混温度升高,sc晶体的生成率和结晶度逐渐下降;聚乳酸立构复合物的加工稳定性较好,二次加工后,sc晶体熔点基本不变,生成率和结晶度提高;由于sc晶体的存在,PLLA/PDLA共混物的耐热性能提高,退火热处理后耐热性能得到进一步提高.这对于开发高耐热聚乳酸及其加工应用具有重要的应用价值.